Peugeot 308 Key Fob Replacement

Peugeot’s 308 could be catching on a bit however, it’s still appealing. It’s not the most luxurious car in its class, but it is a pleasant and peaceful drive.

We often receive requests from Coded Car Keys to Replace Peugeot Key [Lineyka.Org] fobs. If the issue is persistent or intermittent these tips will aid.

Water Damage

If you leave your fob in the midst of a puddle or splash it with water during kayaking, swimming, canoeing, rafting or canyoning, it’s likely to be damaged by water. Keep your key fob in a dry, dry bag each time you go outdoors or do things that expose it to excessive water.

You’ll also want to ensure that the fob is completely dry before opening it up and using it again. If you detect any smells coming from the fob, like an industrial liquid smell or the scent of windshield washer fluid, it’s another indication that it’s submerged in water.

A circuit that is wet can cause the battery’s power to be depleted or even explode. If you are able to get your 308 keyfob out of the water it is best to turn the button side up and shake as much water out as you can prior to opening the casing. Take the battery out, and then clean the circuit board with a cotton swab, which is dipped in 90 percent alcohol.

Other reasons why your Peugeot 308 remote entry keyless system may not work include a dead coin-cell battery or receiver module issue, signal interference or a damaged chip. If none of these causes the cause, you can try resetting your system by disconnecting the battery with 12 volts for around 15 minutes.

Dead Coin Battery

Peugeot cars come with a remote-start system which allows the driver to start the car from afar while warming up or cooling down the vehicle prior to stepping inside. This feature is extremely useful particularly during the winter’s cold and chilly months. The remote start system may cease to function for a variety reasons, such as the battery being dead.

The coin-shaped battery inside the key fob can last between two and four years, based on how frequently it is used, the location it was purchased, and how it is used. The date for use-by will be printed on the packaging or mentioned in the user manual.

If the key fob stopped functioning after exposure to clean tap water and you want to take the battery off, clean the chip using a paper towel and isopropyl alcohol, and then dry it thoroughly before replacing it. If you expose it to soapy or salty water, the chip could be fried and you will require replacing the key fob completely.

If you’re unsure whether the battery is in good condition you can check its voltage with a multimeter attached to both the minus and plus terminals. If the voltage is lower than 12-13 volts, then you should replace the battery. You can also reset your onboard computer by disconnecting and reconnecting the 12 volt batteries in reverse order. (positive cable first then negative cable). The engine should be able to start after this.

Faulty Receiver Module

If you’re not getting the “Key Detected” message on your dashboard, then it’s possible that the receiver module has created a fault. It is the part that transmits the signal when your key fob is activated. It also acts as an alarm and prevents the car from starting without the correct key.

The cause could be a number of factors, including water damage or just the aging process. If the chip inside your peugeot partner key fob 308 keyfob is damaged due to dirty tap water it could be due to the fact that the keyfob was exposed it. In this instance it is necessary to take the device apart and clean it thoroughly with isopropyl alcohol or electronic cleaner. Once it’s dry, you can put the battery back into the battery and try again.

If the problem persists then it’s a good idea to see a local Peugeot specialist or locksmith. They can employ the diagnostic tool to identify the issue and repair it.

The loss of your Peugeot car keys can be an extremely stressful experience. However, a professional auto locksmith can address the issue in just a few minutes. They can cut a new key and programme it to your vehicle, ensuring you can get back to the road in the shortest amount of time. Click here to find a local locksmith near you.

Faulty Electronic Chip

The chip in the Peugeot 308 key fob plays a vital function in the remote control system. If it is damaged your car might not start or you may receive a message saying “anti-theft active”. In this situation, the only solution is to replace the key. Auto locksmiths who are professionals can provide this service within the shortest possible time.

The chip inside the chip of your peugeot 3008 key fob replacement 308 key fob can become faulty due to sweat, water damage dirt, or any other cause. If your Peugeot key fob was exposed to soapy or dirty water, it needs to be cleaned promptly. You can clean the electronic component with paper towels soaked with isopropyl Alcohol. The battery should be allowed to dry completely.

Sometimes keys can not function due to radio interference. This can be caused by other devices that operate on the same frequency as your Peugeot key fob. It can also be caused by bad weather or objects in the vicinity. If you experience this problem it is recommended to visit a Peugeot dealership.

The Peugeot 207/308 key fob is extremely delicate and requires a lot of attention. It is important not to drop or throw the key fob. If you lose it, try to find it as quickly as possible. You can reset all the on-board computers by disconnecting the 12 volt battery for a short period of time. Make sure you disconnect the negative cable first, then the positive.

Hit enter to search or ESC to close